Phone:
+86-25-637-1192
+86-25-637-1193
English
| Quantity: | |
|---|---|
TCA-AA75
TCA-AA75
17927-72-9
1.Product Introduction of the Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9)
Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9), Our model TCA-AA75(equivalent to TYZOR AA75 ),is a titanium chelate with acetylacetone as chelating agent with CAS No. 17927-72-9. It is the equivalent product to Tyzor AA-75 from DuPont.
2.Product Parameter (Specification) of the Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9)
Index | Value |
Appearance | Orange red, viscous and clear liquid. |
Titanium content, % | 9.9 |
Specific Gravity (ρ25), g/cm3 | 0.996 |
Viscosity (25℃), mPa.s | 8.4 |
Boiling Point, ℃ | 82 |
Pour Point, ℃ | 10 |
Solubility | Miscible with most organic solvents, aqueous acetone and dilute acids. |
3.Application of the Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9):
TiLinkTM titanate TCA-AA75 is an adhesion promoter and cross-linker that are essential additives for flexographic and gravure printing inks which are widely used at flexible packaging industry.
Flexible packaging has become an important component of product marketing. Packaging materials usually include a non-absorbing foil based on polyolefin (polyethylene, polypropylene, or co-extruded polypropylene), polyester, polyamide, cellophane, PVC, metallized plastic, or aluminum. Printing on these foils can help to motivate consumers to purchase products, provide information, and offer decorative enhancement.
Typical print platforms for flexible packaging are flexography and rotogravure processes that require specialized inks. The type of ink most often used contains nitrocellulose (NC) as the primary binder.
For flexographic and gravure package printing, TiLinkTM titanate TCA-AA75 helps to improve the final product properties. This is achieved by TCA-AA75 acting as a cross-linker for the binder and as an adhesion promoter between the ink and substrate, which provides the following benefits:
• Improved adhesion of the ink to the substrate
• Enhanced curing
• Improved chemical, solvent, and water resistance
• Enhanced heat resistance
• Decreased drying times or lower cure temperatures
• Increased lamination bond strength
4.Packing Details of the Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9)
The regular packing of Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9)
is 25kg pail, 200L drums and 1000L immediate bulk container.
 |  |  |
5.Storage and Shelf Life of Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9):
Should be stored in dry, cool, ventilated room; keep away from water, moisture, high temperature and fire. This product has a shelf life of at least 12 months if stored in tightly closed original container at room temperature.
If this product is kept beyond the shelf life recommend on the product label, it is not necessarily unusable, but a quality control should be performed on the properties relevant to the application.
1.Product Introduction of the Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9)
Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9), Our model TCA-AA75(equivalent to TYZOR AA75 ),is a titanium chelate with acetylacetone as chelating agent with CAS No. 17927-72-9. It is the equivalent product to Tyzor AA-75 from DuPont.
2.Product Parameter (Specification) of the Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9)
Index | Value |
Appearance | Orange red, viscous and clear liquid. |
Titanium content, % | 9.9 |
Specific Gravity (ρ25), g/cm3 | 0.996 |
Viscosity (25℃), mPa.s | 8.4 |
Boiling Point, ℃ | 82 |
Pour Point, ℃ | 10 |
Solubility | Miscible with most organic solvents, aqueous acetone and dilute acids. |
3.Application of the Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9):
TiLinkTM titanate TCA-AA75 is an adhesion promoter and cross-linker that are essential additives for flexographic and gravure printing inks which are widely used at flexible packaging industry.
Flexible packaging has become an important component of product marketing. Packaging materials usually include a non-absorbing foil based on polyolefin (polyethylene, polypropylene, or co-extruded polypropylene), polyester, polyamide, cellophane, PVC, metallized plastic, or aluminum. Printing on these foils can help to motivate consumers to purchase products, provide information, and offer decorative enhancement.
Typical print platforms for flexible packaging are flexography and rotogravure processes that require specialized inks. The type of ink most often used contains nitrocellulose (NC) as the primary binder.
For flexographic and gravure package printing, TiLinkTM titanate TCA-AA75 helps to improve the final product properties. This is achieved by TCA-AA75 acting as a cross-linker for the binder and as an adhesion promoter between the ink and substrate, which provides the following benefits:
• Improved adhesion of the ink to the substrate
• Enhanced curing
• Improved chemical, solvent, and water resistance
• Enhanced heat resistance
• Decreased drying times or lower cure temperatures
• Increased lamination bond strength
4.Packing Details of the Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9)
The regular packing of Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9)
is 25kg pail, 200L drums and 1000L immediate bulk container.
| | |
5.Storage and Shelf Life of Bis(acetylactonate) diisopropoxide titanium(CAS:17927-72-9):
Should be stored in dry, cool, ventilated room; keep away from water, moisture, high temperature and fire. This product has a shelf life of at least 12 months if stored in tightly closed original container at room temperature.
If this product is kept beyond the shelf life recommend on the product label, it is not necessarily unusable, but a quality control should be performed on the properties relevant to the application.
